Premium Essay

Potential and Kinetic Energy

In: Science

Submitted By Exo1990
Words 594
Pages 3
Assignment: SCI103 Phase 5 Lab Report

TITLE: Potential and Kinetic Energy

INSTRUCTIONS: Enter the Virtual Lab and conduct the experiments provided. Please type your answers on this form. When your lab report is complete, submit it to the Submitted Assignments area of the Virtual Classroom.

Part I – Answer the following questions while in the Phase 5 lab environment.

Section 1 – From the left of the screen to the right, the red balls have a center of mass placed at 20 feet, 15 feet, and 10 feet high respectively.
1. Suppose each red ball weighs 20 lbs. Find the potential energy (PE) for each ball on each ramp. In this lab mass is given in pounds and height is in feet, so use 32.2 ft/sec2 as the gravitational constant. Your answer will be in foot-pounds since US units are being used.

PE = m g h where g = 32.2 ft/sec2

Ramp 1: Potential energy is 541.21

Ramp 2: Potential energy is 406.21

Ramp 3: Potential energy is 271.10

2. Predict the maximum speed (velocity) of each ball on each ramp. How would this speed change if each ball’s mass was doubled? ASSUMPTION: assume there is no friction and that all the potential energy you calculated in question 1 is transformed into kinetic energy – PE = KE. Use the following equation.

KE= ½ m v2
You want to calcu-late v maximum speed v = [KE/ ½ m]½

This means divide the KE by half the mass and then take the square root.

Max v for 20 lb. ball Max v for 40 lb. ball
Ramp 1 25.38 17.94
Ramp 2 21.98 15.54
Ramp 3 17.94 12.69

Section 2 (Each of the green balls has a center of mass placed at 20 feet high). While each ramp looks identical, each ramp has a different amount of friction.
3. Which ramp has the greatest friction? Ramp 2

4. Suppose each green ball weighs 10 lbs. Assuming there is no friction, calculate the potential energy for each ball on each ramp.…...

Similar Documents

Premium Essay


... Assignment #1 ASSIGNMENT #1 Energy can be converted from one form to another by one form of energy decreases, other forms increasing, because the total energy has to stay constant and that’s only if you're looking at an isolated object. Potential energy can be converted to Kinetic and kinetic can be converted to potential. (Tillery, Enger, & Ross, 2009, p. 67). Energy can be converted in three basic ways through 3 actions of forces. Gravitational Forces is when gravity accelerates a falling object, its converts its potential energy to kinetic energy. Electric and Magnetic Force Fields can convert charged particles, which electrical fields use forces, possess potential energy of an electric field in a way similar to that of an object in a gravitational field. Frictional Forces can be converted into thermal energy, which is heat, whenever the object slides against another object. An example of an energy being converted from one form to another is a lightbulb. It converts electrical energy to radiant energy. A car can covert chemical energy to mechanical energy. A solar cell converts radiant energy to electrical energy to mechanical energy. A fuel converts to chemical energy to heat energy. What we mean by fossil fuels is that Fossil fuels are energy resources that come from the remains of plants and animals. These remains are millions of years old. Fossil fuels, like coal, oil, and natural gas, provide the energy that powers our lifestyles and our economy....

Words: 658 - Pages: 3

Premium Essay


...Submitted to: Submitted by: Mr. Harsh Verma Pankaj Gupta Varun Sehgal Swati Mehta Why Kinetic-Honda Company failed? 1.) Kinetic seemed to miss the pulse of the market, which was fast moving towards motorcycles. Kinetic had no motorcycles to offer - mainly due to the Honda joint venture stipulations. 2.) Miscalculated the purchasing power of the Indian Middle class due to this they couldn’t grow. 3.) Financial Position of the company - operating margin was the lowest in the industry because of the high import content of raw materials. 4.) Issues between Kinetic and Honda over - introduction of new models, advertising expenditure, marketing strategies, etc. As a result, the company suffered in terms of growth and profitability. 5.) Kinetic as an Umbrella brand not being as promoted - Consumers associated the name Kinetic with scooters and 'Luna' with mopeds, but did not see them as belonging to the same business house. 6.) Less Advertising Expenditure on newspaper and television of introducing a new product. 7.) The cost of making the Kinetic scooter was higher than the cost of manufacturing a motorcycle, the selling price of the latter was Rs 10,000 more. What can be done to increase the sales 1.) Promotion of Kinetic brand on both Television and Newspaper ad campaign. 2.) Public awareness camp and scooter service campaign about the new product launch. 3.) Needs......

Words: 513 - Pages: 3

Free Essay


...converting energy from one form to electricity. The process used may be a direct conversion process, where the energy source is converted directly to electricity. An example of this is solar photovoltaic cells, which converts the energy found in solar radiation directly to electricity. An indirect conversion process consists of converting energy from one form, to an intermediate form, to electricity. Coal-fired generating plants are an example of the indirect process, as the chemical energy released as heat by burning the coal is changed to rotating kinetic energy by the steam turbine, and then the rotating kinetic energy is converted to electricity. The majority of the electricity today is produced through an indirect energy conversion process. Both indirect and direct processes use the following major sources of energy for the production of electricity: fossil fuels, nuclear energy, solar radiation, and hydro energy. Fossil fuels include coal, petroleum, and natural gas. Fossil fuels are a finite, non-renewable resource. They remain the primary source for the production of electricity. The combustion of these fuels releases their chemical energy, which produces heat to power steam turbines. The steam turbines power rotating electric generators, which turn kinetic energy into electricity. No energy conversion process converts all the energy present in one form completely into the new form. Since the production of electricity from fossil fuels involves several energy......

Words: 1142 - Pages: 5

Free Essay

Chemical Kinetics

...Enzyme Kinetics: Inversion of Sucrose Abstract Enzymes are a class of proteins that catalyze practically all biochemical reactions. The enzymatic reactions were looked at by the use of two comparable reactions of enzyme invertase and a acidic form of the reaction. The order of the nonacidic enzymatic reaction was zero order due to substrate concentration and due to the fact that the reaction was time dependent. It is also due to having large R2 value at 0.9932 for D run and a smaller R2 value at 0.9902 for C run. The acidic runs had a first order reaction, which had a lower R2 values at 0.9028 for run D and 0.9028 for run C. Also, the percent error in run C at 33.31% was found to be much lower than the percent error in run D at 55.77%, which mean the concentration of run C is more effective than run D. I. Introduction In this experiment the chemical kinetics of the enzyme catalyzed inversion of sucrose was studied. The reaction that we will study in this experiment is the inversion of sucrose, catalyzed by the enzyme invertase that is derived from yeast: The rate of reaction of this reaction was compared to the same reaction that is to be catalyzed by hydrogen ions. Enzymes make up an important class of proteins that are used to catalyze a wide array of biochemical reactions. The enzyme that was used to catalyze the reactions in this lab experiment was the enzyme...

Words: 1634 - Pages: 7

Free Essay


...discuss how energy can be converted from one form to another, giving specific examples. The ability to do work is how energy can be defined. “Energy is never created or destroyed. Energy can be converted from one form to another but the total energy remains constant” (Tillery, Enger, & Ross, 2009, p.65). There are various forms of energy and terms are used to distinguish one from the other. There are not different kinds of energy even though there are various forms. These five different forms of energy are categorized as mechanical, chemical, radiant, electrical and nuclear. Mechanical energy is a combination of potential and kinetic energy resulting from the force of gravity or the movement or release of a machine component. An example of mechanical energy would be bowling ball (kinetic energy) striking a pin and displacing it (potential energy). Chemical energy is a form of potential energy that is absorbed or released by chemical reactions. Dried wood stores chemical energy and when burned, releases chemical energy that converts to heat and light. Radiant energy is energy that travels through space. An example of radiant energy would be light. The light from the sun makes it possible for living things to live on earth by providing fuel and warmth. Electrical energy is a form of energy from electromagnetic interactions. Electrical energy is the presence and flow of an electric charge. Lightning or a light bulb would be examples of electrical energy. Nuclear energy is......

Words: 763 - Pages: 4

Premium Essay


...In physics, energy can be defined as an indirectly observed quantity which comes in many forms including kinetic energy, potential energy, among others. Energy, like mass, is a scalar physical quantity and its S.I unit is joules. There are 2 categories of energy including: renewable (energy that comes from resources which are continually replenished such as sunlight, wind, rain, tides, waves and geothermal heat. Can also be defined as any energy resource that is naturally regenerated over a short time) and non renewable (energy from fossil fuels such as coal, crude oil, natural gas and uranium and exists freely in nature). Renewable energies include: Geothermal energy, Hydro-electric energy, Solar energy, Tidal energy, Nuclear energy, Wind energy, among others while non renewable energies include: petroleum, nuclear power, among others. ENERGY USE IN KENYA Renewable energy can be particularly suitable for developing countries like Kenya. In both rural and remote areas, distribution and transmission of energy generated through fossil fuels (non- renewable) can be difficult and expensive therefore it is easier to supply or use renewable energy. Energy use in Kenya includes: • Biomass (anything plant material or animal waste used as fuel)- 68% • Fossil fuels ( fuel consisting of remains of organism preserved in rocks in the earths crust with high carbon and hydrogen content)- 22% • Electricity (flow of electric power or charge)- 9% • Solar and wind- less than 1%......

Words: 296 - Pages: 2

Premium Essay


...Ch. 15: Kinetics          15.1 15.2 15.3 15.4 15.5 15.6 15.7 15.8 15.9 Week 15 Reaction Rates Rate Laws Forms of Rate Laws Integrated Rate Law Rate Laws: A Summary Reaction Mechanisms Steady-State Approximation A Model for Chemical Kinetics Catalysis CHEM 1310 - Sections L and M 1 Reaction Rates: Example  Recap:  Avg. Reaction rate = +∆[Product]/∆t  Avg. Reaction rate = -∆[Reactant]/∆t Butane, C4 H 10, burns in oxygen to give CO2 and H2 O vapor. If the butane concentration is decreasing at a rate of 0.20 M/s, what is the rate at which the oxygen is decreasing? What is the rate at which the products are increasing? 2C4H10(g) + 13O2(g) Week 15 8CO2(g) + 10H2O(g) 2 CHEM 1310 - Sections L and M Reaction Rates: Example Butane, C4 H 10, burns in oxygen to give CO2 and H2 O vapor. If the butane concentration is decreasing at a rate of 0.20 M/s, what is the rate at which the oxygen is decreasing? What is the rate at which the products are increasing? 2C4H10(g) + 13O2(g) 0.20 M/s For oxygen: 0.20 mol C4 H 10 Ls Week 15 8CO2(g) + 10H2O(g) ? ? ? x 13 mol O2 2 mol C4 H 10 CHEM 1310 - Sections L and M = 1.3 M O2 /s 3 1 Reaction Rates: Example Butane, C4 H 10, burns in oxygen to give CO2 and H2 O vapor. If the butane concentration is decreasing at a rate of 0.20 M/s, what is the rate at which the oxygen is decreasing? What is the rate at which the products are increasing? 2C4H10(g) + 13O2(g) 0.20 M/s For CO2: 0.20......

Words: 954 - Pages: 4

Premium Essay

Solar Energy Potential Assessment Using Gis

...Energy Education Science and Technology 2007 Volume(issue) 18(2): 101-114 Solar energy potential assessment using GIS T. V. Ramachandra Centre for Ecological Sciences, Indian Institute of Science Centre for Application of Science and Technology to Rural Areas (ASTRA), Indian Institute of Science, Bangalore 560 012, India Received 07 December 2006; accepted 15 December 2006 Abstract Renewable energy resources are those having a cycling time less than 100 years and are renewed by the nature and their supply exceeds the rate of consumption. Renewable energy systems use resources that are constantly replaced in nature and are usually less polluting. In order to tap the potential of renewable energy sources, there is a need to assess the availability of resources spatially as well as temporally. Geographic Information Systems (GIS) along with Remote Sensing (RS) helps in mapping on spatial and temporal scales of the resources and demand. The spatial database of resource availability and the demand would help in the regional energy planning. This paper discusses the application of geographical information system (GIS) to map the solar potential in Karnataka state, India. Regions suitable for tapping solar energy are mapped on the basis of global solar radiation data, and this analysis provides a picture of the potential. The study identifies that Coastal parts of Karnataka with the higher global solar radiation is ideally suited for harvesting solar energy. The potential......

Words: 2090 - Pages: 9

Premium Essay

Energy and Potential in Electric Field

...EM Fields and Waves Assignment 1 Energy and Potential In Electric Field it solution Contents Introduction: 3 Electric Field Intensity: 3 Electric Field Strength (First Formula): 3 Electric Field Strength (Second Formula): 4 Energy: 5 Potential Difference and Potential: 5 Electric Potential at a point due to Point charge: 6 Potential Gradient: 8 Conclusion: 10 Table of Figures: Figure 1: Field is radial 8 Introduction: As we know that every electrically charged particle exerts an equal and opposite force on other charged particle/object. These electrically charged particles are surrounded by a field known as electric field. Electric field helps in depicting the force which these particles exert on each other. It is a vector field and its SI unit is NC-1. We use coulombs’ law to find electric field of different charged particles. But as it is quite complicated because of its vector analysis and integration for each component, we try to find a much simple way to find it, in which single integration can give us the required scalar quantity, which can be used to find electric field. This scalar quantity is known as potential or potential field. Electric Field Intensity: The electric field of a charged particle explains the strength of a charged particle depending on its distance from that specific point. The charge also tends to change that field accordingly when any other particle tries to......

Words: 1364 - Pages: 6

Premium Essay


...Energy Portfolio management (Like Financial Portfolio management) is the Key to solving today’s and the future’s energy issues….. by Doug Story I believe it has been determined and accepted by almost everyone in the financial management industry and by those of us that invest or have our jobs supply financial instruments such as IRAs, Roth IRAs, 401Ks, etc for our retirement that it is imperative that our financial portfolio be diversified in such a manner that when part of the portfolio drops in value other parts of the portfolio will climb so that we may maintain, protect and continue to grow our funds in preparation for retirement. For example, why was the ENRON collapse such a disaster to most of the employees at ENRON? ENRON management had put pressure on everyone in the company retirement program to put all of their retirement savings into ENRON stock, so when the stock collapsed from its record highs these employees lost everything. If many of the employees at ENRON had invested in a diversified portfolio most of the money they placed in their retirement accounts may have been protected from the collapse of the ENRON stock. What does “Diversified Retirement or Stock Portfolio” mean? Simply put it means having a retirement account that is spread out over a range of stocks, bonds, cash and even precious metals. If the stock market goes down, in theory the bonds and precious metals will stabilize or go up at a rate that equals or reduces the losses due to the......

Words: 1663 - Pages: 7

Premium Essay


...In physics, the kinetic energy of an object is the energy which it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its acceleration, the body maintains this kinetic energy unless its speed changes. The same amount of work is done by the body in decelerating from its current speed to a state of rest. In classical mechanics, the kinetic energy of a non-rotating object of mass m travelling at a speed v is ½ mv². In relativistic mechanics, this is only a good approximation when v is much less than the speed of light. In physics, potential energy is the energy of an object or a system due to the position of the body or the arrangement of the particles of the system. The SI unit for measuring work and energy is the joule (symbol J). The term potential energy was coined by the 19th century Scottish engineer and physicist William Rankine, although it has links to Greek philosopher Aristotle's concept of potentiality. Potential energy is associated with a set of forces that act on a body in a way that depends only on the body's position in space. This allows the set of forces to be considered as having a specified vector at every point in space forming what is known as a vector field of forces, or a force field. If the work of forces of this type acting on a body that moves from a start to an end position is defined only by these two positions and does not depend on...

Words: 486 - Pages: 2

Premium Essay

Assess the Future Potential of Renewable Sources of Energy as Major Contributors to the Uk’s Energy Mix?

...renewable resources produce around 7% of the UK’s energy and when compared to other fuels such as oil and gas, it is still clear that the UK is still heavily depended on fossil fuels, showing that it will be along time before the UK becomes dependent on renewable resources. Wind power has been chosen to be the main renewable resource to provide most of the energy in the future. According to UKWED there is nearly 6000 turbines in the UK, which shows a lot more, must be built to produce most of the UK’s energy.3% of the UK’s energy is produced by wind meaning that 2000 turbines can produce 1% of the UK’s energy. At the build an offshore wind farm it cost £3 billion to produce 341 turbines and it costs only £300 million to build a onshore wind farm consisting of 215 turbines. This show wind power is very expensive and will cost the country a lot of money to build more. This shows that wind power may not be a major contributor in the future. Also building more wind turbines will upset the people in the UK as most people don’t like the look of them and they ruin a lot of beautiful landscapes. But at the moment the wind turbines combined produce 30,000,000 MWh which is quite a lot and is more than some of the power plants in the UK combined, which shows it could still be a major contributor as the wind turbines are very power efficient and we do have the right climate for it. Currently solar doesn’t produce much of the UK’s energy as the UK doesn’t have the right......

Words: 545 - Pages: 3

Premium Essay

The Study of Heat, Kinetic Energy Theory of Matter, and Temperature

...The Study of Heat, Kinetic Energy Theory of Matter, and Temperature Name University Physical Science Professor 17 July 2011 Abstract In this paper, I will discuss the similarities and differences between heat, temperature, and the kinetic energy theory of matter. The purpose of this paper is to discuss how the study of heat relates to the kinetic energy theory of matter. It will also discuss what the study of heat is. I will then explain what temperature is. I will follow this by then explaining what the relationship between both heat and temperature are. Next, I will give the difference in both heat and temperature. I will then give examples of the various properties of a substance that will determine its heat capacity. Lastly, I will give the various sources of heat. How does the study of heat relate to the kinetic theory of matter? The study of heat is explained through science. It is not a theory of sorts like kinetic theory of matter is. Heat is what makes kinetic energy. The more heat that is produced the higher the kinetic energy level of an object or substance is or has. The kinetic energy theory of matter is a scientific theory that states that matter consists of small particles in a rapid random motion. The kinetic energy theory gives the differences of three states of matter; solids, liquids, and gases. The result of heat in these three states of matter has different effects on each. For instance, if you gave the same amount of heat off for all......

Words: 766 - Pages: 4

Free Essay


...Energy Agnese Strayer University Dr. Andrey R. Pavlov Science 110 April 21, 2012 We recognize energy through the concepts of force and motion. When work is done on an object, it gains energy. Energy is made of two types, potential energy which is stored energy and kinetic energy which consists of moving energy. Food is stored energy. It is stored as a chemical with potential energy. When your body uses that stored energy to do work, it then becomes kinetic energy.(Integrated Science, 2008) Any form of energy can be converted to another form. Most technological devices that we use are recognized as energy converters. Energy cannot be created, nor destroyed. This is the reason why it exists in many forms. For example, a light bulb converts electrical energy to radiant energy. It can come in various forms, mechanical, chemical, radiant, electrical, and nuclear. Thermodynamics is the study of energy being converted from one form to another. There are three laws of thermodynamics. The first law states that energy cannot be created or destroyed, but it can be converted from one form to another. The second law states that heat energy can be transferred only from body at high temperature to the body at lower temperature. Heat can only be moved from high to low without external work being performed. If you want to move the heat energy from low temperature reservoir to high temperature reservoir, then something external must intercept in order for that to work.......

Words: 891 - Pages: 4

Free Essay

Energy, Fossil Fuels & Alternative Energy

...Energy, Fossil Fuels & Alternative Energy 22 July 2012 In order to understand how energy is converted from one form to another we must first define energy as the ability to do work and “Energy can never be destroyed. Energy can be converted from one form to another but the total energy remains constant (Integrated Science)”. Now that we have defined energy we can go further as there are two types of energy. The first type of energy is Kinetic energy, and is related with motion. Examples of Kinetic energy would be wind, water, machines, and even thermal energy. Our second form of energy is potential energy or energy waiting to be used. To types of potential energy would be fossil fuels or nuclear. Within these two types of energy it can be converted into the same 5 different forms of energy: (1) Mechanical Energy: energy from machines; (2) Chemical Energy: energy produced through a chemical reaction (3) Radiant energy: energy in the form of radiation or in the absence of matter (4) Electrical energy: derived from electromagnetic interactions and (5) Nuclear: energy produced by a nuclear reaction. Energy can go from one type of energy to another through energy transfer and most energy becomes mechanical energy. An example of this would be a power plant. The plant first burns coal (Potential energy converted to kinetic energy) to boil water that in turn spins turbines that produces electricity. All the energy is transferred to the other but only 40% of......

Words: 1177 - Pages: 5