Premium Essay

Pinto Fires

In: Business and Management

Submitted By maggietrl
Words 1313
Pages 6
Acting as a recall coordinator would by no means be an easy task. However, if I were to put myself in that role, here is what I believe I would do following the eight-step method to ethical decision making.
The first step is identifying the relevant facts. In the Pinto Fires Case, I believe there are six large facts that are the most relevant to determining whether a recall is the appropriate course of action. The first fact is that Ford Motor Company discovered the issue before the Pinto was released. With many recalls, the issues are not discovered until after the products in question are released, but Ford knew about this major issue and released the car anyways. The second crucial fact builds off the previous one – Ford knew how to fix the issue. They had found three possible solutions through their testing, but did not implement any of them. The third relevant fact is that Ford had shortened their amount of preparation time to release it earlier. This was something that had never been done before, so the fact that they cut down the amount of time they were spending on preparing this car by over a year was a recipe for disaster. The fourth fact to consider is the fact that Ford Motor Company was within the legal standards at the time. While Federal Motor Vehicle Safety Standard 301 had been proposed, it had not been adopted, so Ford’s move was legal. Furthermore as the fifth fact, in the 1970s, consumers were not nearly as concerned with safety. In fact, Ford had previously added a relatively costly safety feature only to find that it added no appeal to the consumers. The final fact is the fact that the National Highway Traffic Safety Administration had as part of their regulations the cost-benefit analysis, which allowed a company to make a decision based on if the benefits were greater than the cost.
The second step is to identify the ethical…...

Similar Documents

Premium Essay

Pinto

...Case 10: Ford’s Pinto Fires: The Retrospective view of Ford’s Recall Coordinator Ford motor company, North America’s subcompact automobile company; design Pinto in 1971 in order to compete with fuel efficient Volkswagen and Japanese imports. Pinto’s major design flaw- a fuel tank prone to rupturing with moderate speed rear-end collisions- surfaced not too long after the Pinto’s entrance to the market. In April 1974, the Center for Auto Safety Administration (NHTSA) to recall Ford Pintos due to the fuel tank design defects. As a result of tests performed of NHTSA, as well as the extraordinary amount of publicity generated by the problem, Ford Motor Company agreed to recall Ford Pintos. Dennis A. Gioia was the field recall coordinator at Ford Motor Company as the Pinto fuel tank defect began unfolding. Gioia responsibilities include the operational coordination of all the current recall campaigns, tracking incoming information to identify developing problems, and reviewing field reports of alleged components failures that led to accidents. Business Ethics: In the Ford Pinto Case, what moral issues does the Pinto case raise? what is the dollar value of the human life.Business Ethics: In the Ford Pinto Case, what moralissues does the Pinto case raise? that a car that explodes when hit in the rear can be used to deliver mailBusiness Ethics: In theFord Pinto Case, what moral issues does the Pinto case raise?That businesses should not be putting a value on human life and......

Words: 850 - Pages: 4

Premium Essay

Pinto Fires Case

...PINTO FIRES CASE The assumption that ‘it’s easy to be ethical’ assumes that individuals automatically know that they are facing an ethical dilemma and that they should simply choose to do the right thing. But decision makers may not always recognize that they are facing a moral issue. Rarely do decisions come with waving red flags. Dennis Gioia was recall coordinator at Ford Motor Company in the early 1970s when the company decided not to recall the Pinto despite dangerous fires that were killing the occupants of vehicles involved in low-impact rear-end collisions. In his information and overloaded recall coordinator role, Gioia saw thousands of accident reports, and he followed a cognitive “script” that helped him decide which situations represented strong recall candidates and which did not. The incoming information about the Pinto fires did not penetrate a script designed to surface other issues, and it did not initially raise ethical concerns. He and his colleagues in the recall office did not recognize the recall issue as an ethical issue. From the standpoint of Hooker’s test, we will start with the geralizability test. Hooker (2011) states that to pass generalizability, it must give the reasons for an action have to be consistent with the assumption that others who have the same reasons act the same way. To release the Pinto as scheduled and risk the safety of those who purchased it or spend more time designing the car, thereby seceding more of the......

Words: 716 - Pages: 3

Premium Essay

Case 10 Ford Pinto Fires

...College for Financial Planning ETH 550—Business Ethics Master Course Syllabus I. Course Description Course Description This course is designed to achieve the following objectives:        Explore the ethical dimension in the current global environment. Study and apply major normative ethical theories to business situations. Understand the relevance of stakeholders to business decisions. Improve ethical and moral decision-making processes. Analyze case studies that present ethical business dilemmas. Understand moral, amoral, and immoral decisions in business situations. Encourage ethical behavior and professionalism in all activities. Prerequisites There are no prerequisites for this course. II. Overview Overview The goal of this course is to teach students how to ethically interact in today's global business environment. III. Required and Recommended Text Required Text Modern Language Association of America. MLA Style Manual and Guide to Scholarly Publishing. 3rd ed. New York: Modern Language Association of America, 2008. ISBN 0-87325-699-6. Perkins, John. Confessions of an Economic Hit Man. Plume, 2005. ISBN 978-0452287082 (paperback). Weiss, Joseph W. Business Ethics: A Stakeholder and Issues Management Approach. 5th ed. South-Western, 2009. ISBN 978-0-324-58973-3 (paperback). How to Order Texts You may order textbooks online at www.cfpbookstore.com, by fax at 800-274-9105, or by telephone at 800-274-9104. Students interested in selling their......

Words: 508 - Pages: 3

Free Essay

Pinto

...Iacocca's specifications for the design of the car were uncompromising: "The Pinto was not to weigh an ounce over 2,000 pounds and not cost a cent over $2,000." During design and production, however, crash tests revealed a serious defect in the gas tank. In crashes over 25 miles per hour, the gas tank always ruptured. To correct it would have required changing and strengthening the design. Many studies of reports and documents done by Mother Jones on rear-end collisions involving Pintos reveal that if you ran into that Pinto you were following at over 30 miles per hour, the rear end of the car would buckle like an accordion, right up to the back seat. The tube leading to the gas-tank cap would be ripped away from the tank itself, and gas would immediately begin sloshing onto the road around the car. The buckled gas tank would be jammed up against the differential housing (that big bulge in the middle of your rear axle), which contains four sharp, protruding bolts likely to gash holes in the tank and spill still more gas. Now all you need is a spark from a cigarette, ignition, or scraping metal, and both cars would be engulfed in flames. If you gave that Pinto a really good whack?say, at 40 mph - chances are excellent that its doors would jam and you would have to stand by and watch its trapped passengers burn to death. In pre-production planning, engineers seriously considered using in the Pinto the same kind of gas tank Ford uses in the Capri. The Capri tank......

Words: 682 - Pages: 3

Premium Essay

Ford Pinto

...Ford Pinto Case Study MGT/216 November 11, 2010 Executive Summary In the1960's, the American small-car industry had strong competition for Ford, Volkswagen and several Japanese companies. In order to battle their challengers, Ford expedited its most contemporary automobile, the Pinto, into manufacturing. Fabrication was completed in a smaller extent of time than is generally mandatory to generate an automobile. The expected time to produce a vehicle is forty-three months however Ford took no more than twenty- five months (Trevino & Nelson, 2007). While Ford had the opportunity to produce a new model that would decline the risk of the Ford Pinto from blowing up, the corporation selected not to execute the plan. This design expense would have a rate of $11 for each vehicle. A study demonstrated the innovative plan would have resulted in a reduced amount of 180 casualties. The corporation argued that they had utilized the traditional risk-benefit tests to decide if the financial expense of adjusting the modifications were larger than society’s shared benefit (Safety X Change, 2009). Ford relied on the figures; the cost would have been $137 million vs. the $49.5 million; a printed fee placed on the vehicle for damages, casualties and injuries. Three adolescent girls passed away in a 1973 Ford Pinto on August 10, 1978, after being impacted from the back by a driver in a small truck (University of Phoenix, 2007). The Ford Pinto was totally immersed in fire and the......

Words: 989 - Pages: 4

Premium Essay

Ford Pinto

...The Ford Pinto Case In the late 1960’s Ford Motor Company wanted to produce a small model car to compete with small Japanese and German imports like Volkswagen, Datsun and Toyota (Danley). In 1969 Ford’s Board approved the plan to produce the Pinto. The CEO, Lee Iacocca, wanted a car that was low weight, under 2,000 pounds, and low cost, under $2,000. Lee “Iaccoca imposed the 2000/2000 rule, i.e., the Pinto could weigh no more than 2000 pounds and cost no more than $2000” (Danley). The engineers had about two years to design and manufacture a product. The 1971 Pinto went into production in 1970. The quick turnaround of the Ford Pinto was huge as the normal time frame to bring a new product to market was about three and a half years. Due to the quick design and production of the Ford Pinto, the car was not put through the normal tests until after production. When put through the rear-end test, it was determined to be below normal standards for cars of that size. For cars of this size, the standard was to place the fuel tank above the rear axle. However, Ford felt placing the gas tank above the rear axle didn’t leave enough trunk space. Therefore, the fuel tank on the Pinto was placed behind the rear axle, close to the back bumper. The design was such that if the car was impacted from the rear at 20 miles per hour or greater, a bolt would puncture the tank and possibly cause the car to erupt in flames. Ford Motor Company was determined to continuing......

Words: 1100 - Pages: 5

Premium Essay

Pinto Fires

...Case Analysis: Pinto Fires Introduction Greed is the root to evil or at least the motivation behind some corporations making a good, ethical decision. The Ford Motor Company fell into a trap of greed that would cost many human lives. Before the disaster of the Pinto Fires, Ford had a reputation as being the safety pioneer in the automobile industry with additions such as the seat belts. However, as the invention of small cars began to take emerge Ford began to loose market shares to the foreign market. Ford had to do something and quick. Foreign markets were beginning to show promise with the vehicles that were going to put out on the market. The Ford Motor Company began to feel the pressure and felt that it needed to be in the limelight of the competition. Lee Iococca, the CEO of Ford, decided that it was time for a change and thus the Ford Pinto was introduced. However, the Pinto had numerous flaws that cost the Ford Company more than ever anticipated. Relevant facts During the 1960's the demand for sub-compact cars was rising on the market. Ford Motor Company, in competition with the foreign market, decided to introduce the Ford Pinto. The Ford Pinto was going to be the new wave for the Ford Company, but it was soon discovered that numerous problems existed. For example, the time that it took to manufacture an automobile was down from three and a half years to just over two years. Before production, however, the engineers at Ford discovered a major flaw in the......

Words: 1551 - Pages: 7

Free Essay

Pinto

...THE PINTO CASE A SHORT SUMMARY In the early 1960s Ford’s market position was being heavily eroded by competition from domestic and foreign manufactures of subcompacts. Lee Iacocca, then President of Ford, was determined to regain Ford’s share of the market by having a new subcompact, the Pinto, in production by 1970. Then Ford engineers crash tested an early model of the Pinto. They found that when the automobile was struck from the rear at 20 miles per hour, the gas tank regularly ruptured. Stray sparks could then ignite the spraying gasoline, engulf the car in flames and possibly burn the trapped occupants. Nonetheless, Ford management decided for several reasons to go ahead with production of the Pinto as designed. First, the design met all applicable federal laws and standards then in effect. Secondly, the Pinto was comparable in safety to other cars being produced by the auto industry. Third, an internal Ford study indicated that the social costs of improving the design outweighed the social benefits. According to the study it was estimated that a maximum of 180 deaths might result if the Pinto design were not changed. For purposes of cost/benefit analysis the Federal government at that time put a value of $200,000 on a human life. Consequently, the study reasoned, saving 180 lives was worth about a total of $36 million to society. On the other hand, improving the 11 million Pintos then being planned would cost about $11 per car for a total investment of......

Words: 727 - Pages: 3

Free Essay

The Ford Pinto

...The Ford Pinto Case Team B Management 216 May 10, 2011 Ian Finley The Ford Pinto Case The horrific tragedy that took place on August 10, 1978 involving Judy Ann Ulrich, Lynn Marie, and Donna Ulrich was a real eye opener to a lot of consumers regarding the Ford Pinto. A van collided into the back of the young girl’s car causing the Pinto to collapse, the fuel tank to rupture, and the car to engulf into flames. Donna and Lynn Marie were trapped inside and suffered to death as a result of the combustion of the vehicle. Judy Ann was able to be extracted from the wreckage but passed away several hours later at a hospital. Two months prior to the casualty, Ford recalled all Pintos produced from 1971 to 1976 to repair their inadequate gas tanks. Ford only took the initiative for the recall after it was revealed that more than fifty people had died in Pinto-related collisions. With the introduction of the Ford Pinto, Ford’s desire for competition, led the company to overlook known construction flaws and their own moral code to endure higher profits. Lynne Marie and Donna Ulrich, along with Richard Grimshaw and the unidentified neighbor; how do you assign a value to a human life? According to the Ford Motor Representatives in the Ford Pinto Fires Case, it is quite simply done with a cost/benefits formula analysis. We’d like to believe that those lost are the only people that mattered, the people whom Ford Motor Company should have considered when they turned down a $137.5...

Words: 1068 - Pages: 5

Premium Essay

Ford Pinto Case

...Ford Pinto Case In the late 1960s Ford Motor Company developed the idea of the Ford Pinto. Foreign automobile such as Germans and Japanese manufactures dominated the small car market. Ford Motor Company did not want to stay behind in production. Chief Executive Officer, Henry Ford II and Lee Iococca’s rushed building new compact cars out in the market within two and half years which, was the Ford Pinto and the shortest production planning. Production and distribution of the 1970s Ford Pinto stirred controversy regarding safety concerns. Ford’s desire to compete with the foreign manufacturers led Ford to overlook known design flaws and their own ethics while in search of higher profits. Ford assigned a team of engineers to work on nothing but the Pinto. This team was required to stick to Iacocca’s goal of “the limits 2000”; this meant that the car could not weigh more than 2000 pounds. This became a challenge for the engineers and created concerns regarding the placement of the fuel tank. Because of the accelerated production the testing was not done thoroughly. Out of 11 Pintos subjected to rear end collisions, eight failed the test. Only the three with baffles between the tank and bumper and a special interior tank lining met safety standards. The project was almost complete, and it was not possible to make redesign revisions and meet the deadline for the release of the Pinto. The car met the requirements for the American public. It was not long......

Words: 867 - Pages: 4

Premium Essay

Pinto Fires

...five Relevant Facts * At its time of release, the Pinto met the required standards. * I received field reports suggesting Pintos were susceptible to “exploding” in rear-end collisions at speeds under 25 miles per hour. * Last year in San Bernardino, California a neighbor of 13 year old Richard Grimshaw’s gas tank ruptured, causing the car to burst into flames. The neighbor did not die from impact, but was killed in the fire. Grimshaw suffered third-degree burns over 90 percent of his body. * The projected costs for 180 burn deaths ($200,000 x 180), 180 serious burn injuries ($67,000 x 180), and 2,100 burned vehicles ($700 x 2,100) is $49.5 million. * Crash-test reports show that eight of the eleven Pintos tested with an average 31 mile per hour rear end collision failed fuel leak tests with the standard fuel tank. The 3 that survived the leak test because special measures were taken to prevent tank rupture or fuel leakage by using a plastic baffle between the axel housing and the gas tank, a steel plate between the tank and the rear bumper, and a rubber lining in the gas tank. * An $11.00 safety improvement on 11 million cars and 1.5 million trucks will cost a total of $137.5 million. 2. Identify ethical issues using both a deontological AND a consequential perspective. From a deontological approach, the rights of Ford Motor Company would conflict with those of people involved in the Pinto fires. An individual has the right to health and safety,......

Words: 1035 - Pages: 5

Premium Essay

Ford Pinto

...Under the leadership of Ford CEO Lee Lacocca, The Ford Pinto Company introduced in 1971 in Canada, and later in U.S, had reputation as being the safety pioneer in the automobile industry. But was trouble impending, the car did not pass on the test, meaning that it failed bellow the state of the art for cars of that size. The design of the car flaws in its Pinto model could cause the car to burst into flames even in minor rear-end collisions. At the time there was no National Highway Traffic Safety Administration rear-end impact standard. Understandably American automobiles were losing market share in the 1960’s due to cheaper Japanese imports. Smaller, cheaper, better gas mileage, and lighter all meant better value to the consumers. Competition is suppose to fuel innovation and help make better products with smilier or better value. In this case Lee Iaccoca did not make a better product. Iaccoca wanted to simply compete and with the Japanese imports. In 1971 The Ford Pinto was made and produced in a accelerated fashion, so it was designed and produced in 25 months rather than the 43 months that it should have taken. Truth to be told it was a decent design it weighed under 2000 pounds and it cost less then 2000 dollars. The only really down fall was the rear-end design the Pinto was not really tested for rear-end impact, and when Ford engineers testing the rear-end impact for standard safety procedure the car failed the test. To make matters worse the rear-end......

Words: 1779 - Pages: 8

Premium Essay

The Ford Pinto

...Alvin M. Panganiban Sir. Sammy P. Pagaduan MBA-1 Business Ethics Case Study: The Ford Pinto 1. What moral issues does the Pinto case raise? Answer: The Pinto case raise moral issues in human rights because even there were various ways of making the Pinto’s tank safer they refused technical improvement to prevent gas tanks from leaking. Given that number of people killed by fires from car, how they can value those individuals’ lives? Ford officials decide not to push the modification of the cars because it will be costly for them and not considering human’s life. 2. Supposed Ford officials were asked to justify their decision. What moral principles do you think they would invoke? Assess Ford’s handling of the Pinto from the perspective of each of the moral theories discussed in this chapter. Answer: With the use of risk/benefit analysis required by NHTSA, Ford officials justified in its decision not to change the Pinto model to increase vehicle safety, not considering the balance outlook on company’s perspective and human safeness. The moral principles that should invoke Ford officials is the act utilitarianism because this approach evaluates each action separately and the consequences that arise including any harms and benefits incurred by any people involved in the case. 3. Utilitarians would say that jeopardizing motorists does not by itself make Ford’s action morally objectionable. The only morally relevant matter......

Words: 527 - Pages: 3

Premium Essay

Pinto

...In the case of the ford pinto Lee Iacocca wanted to produce a car to meet with the competition of the Japanese market. The car was to be designed and produced in a condensed time 25 months vice the 43 which would have been the usual. Ford motor company completed the task. At the time there was not a standard from the national highway traffic safety committee as to a rear-end impact, that requirement was not in place until after production. I find Ford was not acting un-ethical in the design and production of the vehicle. The un-ethical part of the event started at the point when the rear-impact test was performed and it was found that the pinto was not up to par. Ford was on the correct path as to the testing of the pinto. There will always be a new regulation in any process of production. Any company has an ethical and moral obligation to meet or want to exceed regulations as to quality of a product. Understanding there will be a cost analyst as to procedures in production, cost of materials and life expectancy of the “product”. Further explanation here as to procedures the production of the product may need to be weighed as to the best economical or the requirements of inspection points during the process, next the needed quality of materials as if to manufacture a dish with a non-toxic finish for food use. And the most confused life expectancy of the product, whether it be a car or a prosthetic hip joint. In an article from NBCNEWS Herb Weisbaun found that consumer......

Words: 1022 - Pages: 5

Premium Essay

Ford Pinto

...THE FORD PINTO CASE: THE VALUATION OF LIFE AS IT APPLIES TO THE NEGLIGENCE-EFFICIENCY ARGUMENT Christopher Leggett Law & Valuation Professor Palmiter Spring, 1999 Abstract Text of Paper Abstract The cases involving the explosion of Ford Pinto's due to a defective fuel system design led to the debate of many issues, most centering around the use by Ford of a cost-benefit analysis and the ethics surrounding its decision not to upgrade the fuel system based on this analysis. ISSUE Should a risk/benefit analysis be used in situations where a defect in design or manufacturing could lead to death or seriously bodily harm, such as in the Ford Pinto situation? RULE There are arguments both for and against such an analysis. It is an economically efficient method which has been accepted by courts for numerous years, however, juries may not always agree, so companies should take this into account. ANALYSIS Although Ford had access to a new design which would decrease the possibility of the Ford Pinto from exploding, the company chose not to implement the design, which would have cost $11 per car, even though it had done an analysis showing that the new design would result in 180 less deaths. The company defended itself on the grounds that it used the accepted risk/benefit analysis to determine if the monetary costs of making the change were greater than the societal benefit. Based on the numbers Ford used, the cost would have been $137 million versus the $49.5......

Words: 9256 - Pages: 38