Free Essay

Electro Steel Castings Limited

In: Business and Management

Submitted By dsalman0
Words 269
Pages 2
1. What are the key success factors for Electrosteel? Is international expansion a good idea? Success Factors
India had policies that protected local industry, and that combined with complicated government bureaucracy, complex duties, and convoluted tax structures that made it difficult for multinationals to conduct business there. Electrosteel being the local player could enjoy the protectionism provided by the local state and central governments. As the state and the central governments were investing highly on the infrastructural projects, Electrosteel was growing at a rapid speed owing to these new infrastructural projects across the domestic market. Being the biggest producer of CIP and DIP in the domestic market Electrosteel they have a Well Established brand in India and maintained an extensive local network of agents and a team of sales professionals. In India the operational costs are very low and the labour is available at cheaper cost than those used by competitors. The skilled labour is available in India at fairly low wages and the employees at Electrosteel are loyal. Early entry into market in 1965 gave it First Movers advantage The plant had been accredited with ISO 9002 certification and international product certification widely recognized by customers. International Expansion International expansion would offer a strong opportunity for continued growth, with the added benefit of providing additional hard currency for further investment in new production technologies. Expanding the company internationally would make it a global player and building an overseas plant was particularly attractive, as it would effectively translate into Electrosteel being considered a global competitor, yielding lower costs and reduced import duties. The growth experienced during 1990s in the…...

Similar Documents

Free Essay

Electro-Osmotic Pulse Technology

...unusable due to poor air quality. In selective problem areas, the usual approach to the treatment of water intrusion problems is to 'trench and drain', in other words, to excavate and expose the wall area and the base of the foundation, to replace waterproofing on the wall surface, and to install a drain tile system around the building or affected area. Other areas, such as floors, are untreatable using conventional methods. Electro-osmotic pulse (EOP) technology offers an alternative solution that can mitigate some water-related problems from the interior of affected areas without the cost of excavation. Further, by lessening water seepage through concrete walls and floors, indoor humidity is reduced, thereby alleviating corrosion damage to mechanical equipment, lessening mould problems, and enhancing indoor air quality. 1.2 Electro-Osmotic Flow If ions of one sign are preferentially adsorbed at a solid solution interface, a net charge or electric potential difference develops across the interface. This phenomenon is referred to as electro osmosis. It was found that when a potential difference is applied to electrodes immersed into an electrolyte solution on opposite sides of a porous plug or fine capillary tube, a flow of the solution results. Similarly when a solution is forced through such a barrier by hydrostatic pressure, a potential difference develops between the solution on one side of the barrier and that on the other. This is called the streaming......

Words: 4600 - Pages: 19

Premium Essay

Steel Industry

...STEEL INDUSTRY ANALYSIS 1. Industry trends: Indian and Global perspectives, recent happenings. Steel is the back bone of human civilization, it is very crucial in development of a modern economy. The per capita consumption of steel shows the living standard of people in any country. Global Perspective: The industry directly employs about more than two million people worldwide, with a further two million contractors and four million people in the supporting industries. Considering steel’s position as the key product supplier to industries such as automotive, construction, transport, power and machine goods, and using a multiplier of 25:1, the steel industry is at the source of employment for more than 50 million people. World crude steel production has increased from 851 mega tonnes (Mt) in 2001 to 1,527 Mt in 2011. (It was 28.3 Mt in 1900).World average steel use per capita has steadily increased from 150 kg in 2001 to 215 kg in 2011. India, Brazil, South Korea and Turkey have all entered the top 10 steel producers list in the last 40 years. World Steel in Figures 2012 The World Steel Association (world steel) has published the 2012 edition of World Steel in Figures. World Steel in Figures provides essential facts and statistics about the global steel industry. The book contains comprehensive information on crude steel production, apparent steel use, pig iron production, steel trade, iron ore production and trade, and scrap trade. World Steel in Figures lists......

Words: 4861 - Pages: 20

Free Essay

Electro

...Electro (short for either electro-funk or electro-boogie) is a genre of electronic dance music which first became apparent in the early 1980’s. It was directly influenced by the use of TR-808 Drum Machines, Moog Keytar synthesizers and funk sampling. The basic conventions of an Electro song would include heavy electronic sounding deprived of vocals in general, although if present, they are delivered in a deadpan manner, often through an electronic distortion such as vocoding and the use of a drum machine. This would be one of the main differences between electro and genres which were around in the late 1970’s such as Disco and boogie. A main influence of the growth of Electro was the creation of MIDI (Musical Instrument Digital Interface) which was created in 1982. MIDI is an industry standard protocol enabling electronic musical instruments, such as synthesizers and drum machines, computers and other electronic equipment (MIDI controllers, sound cards, samplers) to communicate and synchronize with one-another. Unlike previous analog devices, MIDI does not transmit an audio signal, it instead sends an event messages about pitch and intensity, control signals for parameters such as volume, vibrato and panning, cues, and clock signals to set the tempo, allowing the different musical features to build upon one another, creating more complex music and also develops the integration of different devices. The creation of MIDI led to sub genres such as Synth Pop to grow, by which......

Words: 364 - Pages: 2

Free Essay

Us Steel

...INTRODUCTION The United States Steel Corporation more commonly known as U.S. Steel is an integrated steel producer with major production operations in the United States, Canada, and Central Europe. The company was the world's 13th largest steel producer in 2010. It was renamed USX Corporation in 1986 and back to United States Steel Corporation in 2001 when the shareholders of USX spun off the oil & gas business of Marathon Oil and the steel business of U. S. Steel to shareholders. In 2001 it was still the largest domestically owned integrated steel producer in the United States, although it produced only slightly more steel than it did in 1902, after significant downsizing in the 1980s. U.S. Steel is a former Dow Jones Industrial Average component, listed from April 1, 1901 to May 3, 1991. It was removed under its USX Corporation name with Navistar International and Primerica. Formation J. P. Morgan and the attorney Elbert H. Gary founded U.S. Steel in 1901 (incorporated on February 25) by combining Andrew Carnegie's Carnegie Steel Company with Gary's Federal Steel Company and William Henry "Judge" Moore's National Steel Company for $492 million ($13.58 billion today). It was capitalized at $1.4 billion ($38.63 billion today), making it the world's first billion-dollar corporation. At one time, U.S. Steel was the largest steel producer and largest corporation in the world. In 1907 it bought its largest competitor, the Tennessee Coal, Iron and Railroad Company, which...

Words: 5405 - Pages: 22

Premium Essay

Steel

...Light steel construction and modular homes as alternative building methods in South Africa. By: Dewald Barnard 26144362 Submitted in fulfilment of part of the requirements for the degree of B.Sc(Hons)(Construction Management) In the faculty of Engineering, Built Environment and information technology University of Pretoria 1. Chapter 1......................................................................................................................................... 7 1.1Research Proposal.......................................................................................................................... 7 1.2. Problem ........................................................................................................................................ 7 1.2.1 Chapter 2................................................................................................................................ 7 1.2.2 Chapter 3................................................................................................................................ 7 1.2.3 Chapter 4................................................................................................................................ 8 1.2.4 Chapter 5................................................................................................................................ 8 1.3. Research methodology ..........................................................................................................

Words: 10715 - Pages: 43

Premium Essay

Tata Steel

...Introduction of Tata Steel Limited Tata Steel Limited (previously Tata Iron and Steel Company Limited (TISCO)) which was established in 1907, it was the Asia’s first and India’s largest privately owned steel company. This company was the flagship company of Tata group, which started by Jamsetji Tata. Tata Steel had expended the business globally and successfully; their business have been running all over the world. It was ranked the 11th largest steel producing company in the world in 2013. Frame work Is Tata Steel Limited successful just because it is using the right market strategy? Is Tata Steel Limited earning a big profit just because the workers are hard-working? In this essay, I will be using PESTEL and Porter’s Five Forces as my main models to analysis Tata Steel Limited. The purpose of doing this research is to see how Tata Steel Limited managing the business tremendously successful in a real market by applying these analysis methods. Political Factor At all times, government is always acting an key role in the development of different industries. It takes charge of the labor law, tax policy, tariffs, environmental law, trade restrictions and political stability. Political factor may also include what the government wants to provide or not to provide. After 200 years ruled by the British, India became an independent nation in 1947 and India’s economy changed to a free market economy in 1991. Government put a lot effort to change the economy. They......

Words: 2057 - Pages: 9

Premium Essay

Steel Industry Report

...Introduction to the industry Metals have accompanied mankind since ancient ages, and steel, if we begin to follow it from the moment of its historically famed damascene form - for some millennia.  From the era of craftsman-like small-scale production to today's form of industrial mass production, steel has covered an intricate path lined with significant innovations in production processes, development of range and quality of products, and perpetually growing productivity of labour, improving economies and ecological load. In addition, a radical change in relationship to the customers is occuring at the end of this century, namely by a pronounced shift of readiness towards the needs and requirements of these customers.  Steel's indisputable significance is confirmed by the fact that it has become the second most mass-produced commodity after cement production, attaining the world-wide production volume of approx. 750 mil tons yearly. The art of iron production from ore arose in connection with the practices of copper and lead technologies in Anatolya, in northern Syria and possibly also in part of Iran. Iron ores were added as fluxes for treatment of sulphide copper ores. Iron drops, which the local manufacturers identified already 3000 years BC, comparing these with meteoritic iron, already hinted at the existence of the possibility of producing iron, but this only occurred practically 15 centuries later. Since that time, it is necessary to reckon that only small amounts of......

Words: 18924 - Pages: 76

Premium Essay

Electro

...Country Road Limited-Individual Assignment Introduction to Accounting Clark Hicarte s3435339 1.a Trend Analysis allows for examination in changes, movements and patterns in data over a number of time periods. Ultimately, it can assist in predicting future performance for this entity, which can be vital for better decision making (Birt, Chalmers, Byrne, Brooks. Accounting-Business reporting for decision making 4th edition 2012, John Wiley & Sons Ltd, p320). Absolute Figures ($000) | 2009 | 2010 | 2011 | 2012 | Revenue | 347,547 | 381,219 | 423,791 | 422,291 | Sales | 343,078 | 372,120 | 411,652 | 418,981 | Gross Profit | 197,803 | 207,331 | 240,396 | 243,138 | EBIT | 21,400 | 17,861 | 22,319 | 20,054 | Net Profit | 15,161 | 12,733 | 17,847 | 15,662 | Trend Analysis | 2009 | 2010 | 2011 | 2012 | Revenue | 100 | 109.7 | 121.5 | 121.5 | Sales | 100 | 108.5 | 119.9 | 122.1 | Gross Profit | 100 | 104.8 | 121.5 | 122.9 | EBIT | 100 | 83.5 | 104.3 | 93.7 | Net Profit | 100 | 83.9 | 117.7 | 103.3 | 1b Using 2009 as a base year to compare the following years, the index figures shows the significant changes that can be observed from the years 2009 to 2012 in the profitability of Country Road Ltd. Revenue, Gross Profit and the Sale of goods have shown and increasing trend starting the year 2009. However, the two profit figures (EBIT and Net Profit) have indicated an increasing seasonal trend. Country Road seems to generate less profit compared......

Words: 4898 - Pages: 20

Premium Essay

Steel

...at the conclusion. Keywords: Ship breaking, ship dismantling, industrial safety, safety hazards, environmental hazards. 1. INTRODUCTION Ship recycling is the process of dismantling old ship to recover steel scrap and other materials. This industry had begun in Bangladesh in 1960, when a cargo vessel named M D Alpine of Greek was affected by violent storm and beached near sea shore of Fauzdarhat at Chittagong. The ship had to remain there for a long time. In 1965, the vessel was scrapped by Chittagong Steel House. In 1974, Al Abbas, a salvaged Pakistan Navy vessel, which was sunk during liberation war, was scrapped by Karnafully Metal Works and since then commercial shipbreaking began in Bangladesh. Finally in the year 1984, Bangladesh appears as a major ship recycling nation in the world [1]. Until 1960s, ship breaking/recycling activity was considered as a highly mechanized operation that was concentrated in industrialized countries- mainly USA, UK, Germany and Italy. The UK was accounted for 50% of the industry-Scotland ran the largest ship breaking operation in the world. During the 1960s and 70s, ship breaking activities migrated to semiindustrialized countries like Spain, Turkey and Taiwan, mainly for the availability of cheap labour and the existence of re- rolling steel market [2]. But from early 1980s, ship breaking is no more costeffective in those countries and so to maximize profits ship owner’s sent their vessels to the scrap yards of India, China, Pakistan,......

Words: 2918 - Pages: 12

Free Essay

Hindustan Zinc Limited

...2. ROASTING PLANT…………..………………………………………………... 3. ACID PLANT…………………………………………………………………… 4. LEACHING PLANT………………………………………………………..…. 5. ZINC ELECTROLYSIS PLANT…………………………………………….. 6. MELTING AND CASTING…………………………………..………………. MAINTENANCE PROCEDURE AND PRACTICES 7. AGIATATORS………………………………………………………………… 1. ABOUT HINDUSTAN ZINC LTD. Hindustan Zinc Limited (HZL) is an integrated mining and resources producer of zinc, lead, silver and cadmium. It is a subsidiary of Vedanta Resources PLC. HZL is the world's second largest zinc production. HZL operates the world's third largest open-pit mine, and World's largest Zinc Mine in Rampura, Agucha in Rajasthan. Other mines with HZL are located in Sindesar Khurd, Rajpura, Dariba, Kayar and Zawar, all in Rajasthan. HZL is also the world's lowest cost zinc producer. HZL operates Zinc and Lead smelters and refineries at Chanderiya (Chittorgarh), Debari (Udaipur) & Dariba (Rajsamand) in Rajasthan and at Vishakhapatnam in Andhra Pradesh. The total metal production was 840,000 tonnes for year 2010-2011. Hindustan Zinc Limited was incorporated from the erstwhile Metal Corporation of India on 10th January 1966 as a Public Sector Undertaking. In April 2002, Sterlite Industries (India) Limited made an open offer for acquisition of shares of the company consequent to the disinvestment of Government of India’s stake (26%) including management control to Sterlite and pursuant to the......

Words: 3252 - Pages: 14

Premium Essay

Steel..

...Renz Erick R. Delgado BSCE 4 200810163 “STEEL” BASIC STRUCTURE OF THE MATERIAL Steel is an alloy that consists mostly of iron and has carbon content between 0.2% and 2.1% by weight, depending on the grade. It also consists of small quantities such as manganese, chromium, nickel, molybdenum, copper, tungsten, cobalt, or silicon. It is generally hard, strong, durable, malleable alloy and depending on the desired alloy properties, the constituents in steel vary. The density of steel varies based on the alloying constituents, but usually ranges between 7,750 and 8,050 kg/m3 (484 and 503 lb/cu ft), or 7.75 and 8.05 g/cm3 (4.48 and 4.65 oz/cu in). Carbon is the most common alloying material for iron, but various other alloying elements are used, such as manganese, chromium, vanadium, and tungsten. Carbon and other elements act as a hardening agent, preventing dislocations in the iron atom crystal lattice from sliding past one another. Varying the amount of alloying elements and the form of their presence in the steel (solute elements, precipitated phase) controls qualities such as the hardness, ductility, and tensile strength of the resulting steel. Steel with increased carbon content can be made harder and stronger than iron, but such steel is also less ductile than iron. Though steel had been produced by various inefficient methods long before the Renaissance, its use became more common after more-efficient production methods were......

Words: 4024 - Pages: 17

Free Essay

Research in Electro

...Research in Electro 1 Digital Multi-tester How to use a Multimeter- The basics or instructions of how to use a multimeter, including how to use an analog or analogue multimeter, or a digital multimeter, DMM, and using multimeters their best advantage.Multimeters are very cheap to buy and are one of the most commonly used pieces of electronics test equipment. Although basic operational multimeter instruction may be given when the test meter is bought, details of how to use the multimeter to test circuits and gain the maximum use from them are not always available.Although there are major differences between the internal circuits within analogue and digital multimeters, the way in which they are used is comparatively similar. However separate sections are given below with instructions on how to use a digital multimeter and how to use an analogue multimeter.How to use a digital multimeterThe operation of a DMM, digital multimeter, itself is normally very straightforward. With knowledge of how to make voltage, current and resistance measurements (see the "Related Articles" on the left hand side of this page for further details) it is then a matter of putting the multimeter to use. If the meter is new then it will obviously be necessary to install a battery to power it. This is normally simple and straightforward and details can be found in the operating instructions for the DMM.   | ... apart from amps, volts, and......

Words: 1437 - Pages: 6

Free Essay

Multi Die Casting

...“DIE CASTING” SUBMITTED BY: Shrimali Yagnesh (05 ME 114) Patel Dixit (05 ME 87) GUIDED BY: Professor Adil Khan DEPARTMENT OF MECHANICAL Murajmalani Lalit (06 ME 79) Parul Institute of Engineering & Technology Mechanical Engineering ACADEMIC YEAR-20009-2010 CERTIFICATE TO WHOM SO EVER IT MAY CONCERN This is to certify that following students of B.E.8th Semester (Mechanical Engineering) have satisfactorily completed their project on “DIE CASTING” Sr. No 01 02 03 Name of Student Shrimali Yagnesh Dixit Patel Murajmalani Lalit Roll No. 05 ME 114 05 ME 87 06 ME 79 Guided By: Adil Khan Lecturer (Mechanical Engg.) Prof. Hitesh Bhargav H.O.D (Mechanical Engg.) PARUL INSTITTUTE OF ENGINEERING & TECHNOLOGY P.O. Limda, Ta: Waghodia, Dist: Vadodara CHAPTER 1 INTRODUCTION HISTORY: □ Casting or founding is one of the oldest manufacturing processes which date back to approximately 4000 B.C. □ The manufacture and use of castings can be traced both in ancient and modern history. □ The first foundry centre came into existence in the China. □ Earliear to that founding was an Art and a craft with all its secrets confined to certain families. □ The middle part of the 20th century saw marked developments in founding. Newer techniques came into existence, the casting phenome none could be understood better, more and more young men took intrest and got trained in this field and eventually many Engineering Institutes teaching metal casting......

Words: 8224 - Pages: 33

Premium Essay

Steel

...bangladesh-economy.org/ Streel Industry: Steady demands nourish robust growth Posted on May 12, 2009 | Leave a comment http://www.newagebd.com/2009/may/12/busi.html#1 STEEL INDUSTRY Steady demands nourish robust growth The file photo shows workers busy at Bangladesh Steel Re-rolling Mills that produces high-grade steel. The file photo shows workers busy at Bangladesh Steel Re-rolling Mills that produces high-grade steel. Shakhawat Hossain The country’s steel industry has been getting continuous investment boom due to steady demands. Steel manufacturers see no major negative impact on their industry as they believe the country’s economy will keep its impressive growth despite the global financial recession. They said the country with nearly six per cent growth in the last three years provides enough clues to consume higher production of mild steel rod to be generated by the big players with their proposed new investments. ‘The rod industry will not face major problem due to growing investment in the sector,’ said Bangladesh Steel Re-rolling Mills chairman Ali Hossain Akbar Ali. ‘Chance is slim even for the small players to become sick as the growing consumption rate of steel will remain in the coming years despite global financial recession,’ he told New Age. BSRM, producer of high-grade steel, makes up more than 25 per cent of the total demand. It is now on trial production in its newly installed 3,00,000-tonne plant, set up at a cost of over Tk 3.5......

Words: 759 - Pages: 4

Premium Essay

Steel

... |%change | |Steel mills |$10,860,760 |$7,159,512 |52% | |Steel products |2,831,209 |2,691,322 |5% | |Raw materials |1,814,329 |1,076,964 |68% | |All other |338,329 |262,498 |29% | |Total net sales to external customers |$15,844,627 |$11,190,296 |42% | Note:Net sales for 2010 increased 42% from the prior year. The average sales price per ton increased 13% from $637 in 2009 to $720 in2010, while total tons shipped to outside customers increased 25%. [pic] [pic] 25 In the steel mills segment, production and sales tons were as follows: (in thousands) |Year End December31 |2010 |2009 |%change | |Steel products |$18,258 |$13,998 |30% | |Outside steel shipments |15,821 |12,075 |31% | |Inside steel shipments |2,752 |1,961 |40% | |Total steel shipments ......

Words: 866 - Pages: 4