Free Essay

Construction and Extraction Projections

In: Business and Management

Submitted By april77
Words 603
Pages 3
Construction and Extraction occupations are expected to grow by about 10% by 2016. This is according to the Occupational Quarterly Outlook (2007). While this is not the leading occupational group growth, it is still on the increase. More than half of these new jobs will be to replace older, retired workers (OQO, 2007)
Construction and Extraction occupations include skilled trades such as, Boilermakers, Masons, Carpenters, Carpet Installers, Building Inspectors, Drywall Installers, Gas and Oil workers, and Electricians, to name a few. You can see a more complete list in the Occupation Outlook Handbook, under the Construction and Extraction tab. For an entry level position in one of these fields a high school diploma or equivalent is needed.
While the projected growth for Construction and extraction job as a whole is only 10%, the growth for Electricians is much higher. As of 2010 there were 577,000 electrician jobs. According to the Bureau of Labor Statistics the projected job growth for this trade is 23% between 2010 and 2020. This is faster growth than all other occupations. This growth will be caused by more new homes and business being built that need wired. There will be more alternative power such as, wind and solar too. This will require new skills for electricians. There is expected to be 133,700 new jobs.
The average pay for a skilled electrician is $48,250 a year or $23.20 an hour. Most electricians will only need a high school diploma or the equivalent, although some will choose to attend a technical school. They will learn their trade through a 4 year apprenticeship. This is on the job training. During each year of training, electrical apprentices will complete 144 hours of classroom instruction and 2000 hands on, on the job training. If one were to attend a technical school that would be applied toward their apprenticeship. Starting pay for an electrical apprentice is usually 30% to 50% of what a fully trained Electrician will make. They will receive pay increases as they learn. According to the Bureau of Labor and Statistics fully trained electricians earn more than most other construction and trade workers and only about one third of all electricians are union members. Once their 4 year apprentice program is completed electricians are considered journeyman and may become licensed to work on their own. Most states require licensure.
Electricians install and maintain electrical systems. This may be in homes, businesses, or factories. Their duties may include; read blueprints or technical diagrams before doing work, install and maintain wiring and lighting systems, inspect electrical components, such as transformers and circuit breakers, identify electrical problems with a variety of testing devices, repair or replace wiring, equipment, or fixtures using hand tools and power tools, follow state and local building regulations based on the National Electric Code, direct and train workers to install, maintain, or repair electrical wiring or equipment. (Bureau of Labor Statistics, U.S. Department of Labor, Occupational Outlook Handbook, 2012-13 Edition, Electricians) Electricians work both inside and outside. They often work in cramped spaces, on their knees. There is often a lot of heavy lifting and bending required. This can be tiring. Most Electricians work full time. When there are constructions deadlines to meet, they often work overtime, including weekends, evenings, and holidays.
Bureau of Labor Statistics, U.S. Department of Labor, Occupational Outlook Handbook, 2012-13 Edition, Electricians, on the Internet at http://www.bls.gov/ooh/construction-and-extraction/electricians.htm (visited January 31, 2013).
Fall 2007 Occupational Outlook Quarterly, accessed January 31,2013, http://www.bls.gov/opub/ooq/2007/fall/art02.pdf…...

Similar Documents

Premium Essay

Construction

...Gotzman Faculty of Engineering and Computer Science Concordia University 1515 St. Catherine west Montreal Quebec H3G 2W1 Subject line: Course ENCS 6721, Sec. UU, Assignment #1 Dear Ms. Gotzman I am Mahmoud Elhuni a civil engineer. I got my bachelor degree at Civil Engineering from Tripoli University. I have six year experience in civil work scope in three deferent construction firms. In addition, I have good skills at several engineering program such as AutoCAD, SAB, Project Plan software and Microsoft Office. Moreover, I've invented a device to settle the level of sewage pipes during installation, and I am working to register my invention. My mother language is Arabic, and I speak English as second language. Currently, I am a graduate student in Master degree program at Concordia University, and I am studying construction management in building engineering department. I am interesting at construction management major because I would like to improve my knowledge in project management planning and controlling. Also, I am willing to study construction processing and controlling project cost by preparing an accurate project cost estimate. My research is about how to estimate the cost of a project by establish an energy unit to estimate the energy that expended in that project. In reality, building the same project in two different cities has different costs. Therefore, instead of estimating the project cost twice, I will estimate the......

Words: 363 - Pages: 2

Premium Essay

Construction

...CONSTRUCTION In the fields of architecture and civil engineering, construction is a process that consists of the building or assembling of infrastructure. Far from being a single activity, large scale construction is a feat of human multitasking. Normally, the job is managed by a project manager, and supervised by a construction manager, design engineer, construction engineer or project architect. For the successful execution of a project, effective planning is essential. Involved with the design and execution of the infrastructure in question must consider the environmental impact of the job, the successful scheduling, budgeting, construction site safety, availability ofbuilding materials, logistics, inconvenience to the public caused by construction delays and bidding, etc. Types of construction projects In general, there are four types of construction: 1. Residential Building construction 2. Industrial construction 3. Commercial Building construction 4. Heavy Civil construction Each type of construction project requires a unique team to plan, design, construct and maintain the project. Building construction Building construction is the process of adding structure to real property. The vast majority of building construction jobs are small renovations, such as addition of a room, or renovation of a bathroom. Often, the owner of the property acts as laborer, paymaster, and design team for the entire project. However, all building construction projects include some...

Words: 3036 - Pages: 13

Premium Essay

Construction

...MAPPING THE CONSTRUCTION ENGINEERING AND MANAGEMENT DISCIPLINE By Mohamed A. Aboulezz A Thesis Submitted to the faculty of the WORCESTER POLYTECHNIC INSTITUTE In partial fulfillment of the requirement for the Degree of Master of Science in Construction Project Management February 2003 Approved Prof. Roberto Pietroforte, Thesis Advisor Prof. Fredrick L. Hart, Head of Department Abstract The objective of the study was to map the structure of the construction engineering and management (CEM) discipline and its contents, trace its evolution, and to identify the most prevailing research areas in the discipline. The study entailed a review of the literature in construction engineering and management as well as two of the leading academic journals in the discipline, particularly a bibliometric study of the contents of the ASCE Journal of Management in Engineering (JME), as a case study of the CEM refereed journals. The JME’s contents were investigated from its onset in 1985 until 2002. The results of the analysis show that 70% of the published papers focused on four main subjects: management and organization of the firm, project management, industry structure and environment, and management of personnel. Considerable changes occurred within the subjects with the emergence of new topics and the decline of others over the eighteen years of publication. The study also analyzed the use of keywords, research methods, and identified authors, and the concentration......

Words: 24458 - Pages: 98

Premium Essay

Construction

...For construction projects, quality control means making sure things are done according to the plans, specifications, and permit requirements. Quality is defined as 'fitness to purpose', in regards to how quality is significant for Bull’s Construction. It means providing a building that has an appropriate quality for the purpose for which it is intended. Moreover, a different way of looking at this concept is that the price of the building could potentially reflect the expectations of quality. A cheaper building probably uses inferior materials and is likely to be less attractive and less durable. Quality control in construction typically involves insuring compliance with minimum standards of material and workmanship in order to insure the performance of the facility according to the design. These minimum standards are contained in the specifications described in the previous section. For the purpose of insuring compliance, random samples and statistical methods are commonly used as the basis for accepting or rejecting work completed and batches of materials. Rejection of a batch is based on non-conformance or violation of the relevant design specifications. Procedures for this quality control practice are described in the following sections. One of the elements that our company will be utilizing to assure a quality measurement process for our projects is an inspector. An inspector tries to ensure that the job is done right the first time and that no major accidents......

Words: 1054 - Pages: 5

Premium Essay

Construction

...Lotus Riverside Complex failed due to many construction errors such as faulty foundation and improper assessment of environment before construction. The workers while excavating the dirt for the garage dumped the dirt on the opposite side of the building. When it rained the excavation started to fill with water and the pressure from the dirt changed the water table of the ground and created three thousand tons of force along with uneven lateral pressure and thus the pilings in the ground to support the building gave way and snapped off sending this thirteen story high building tumbling right over. The building was surrounded by other buildings but was far enough not to affect any of the other surrounding buildings. Engineers who came to the scene of the fallen building said that if the building would have come in contact with other buildings it could have created a domino effect and wiped out a total of nineteen buildings in a matter of minutes. This building disaster could have easily been avoided if the head engineers would have took the time out to calculate the water table around the complex and properly calculated how many pilings would accurately be needed in order to properly secure this building. It was also discovered that the rebar that was supposed to be used was not used at all because they construction supervisors were behind schedule so they decided to skip that step and go directly into the excavating process. Construction errors and ignoring proper......

Words: 991 - Pages: 4

Free Essay

Sod Extraction

...Tolypocladium fungus. As a follow-up to our previous characterization of natural antioxidants from fungal compounds (Sun et al., 2004), the antioxidant potential of hot water extract from Tolypocladium sp. Ts-1 *Corresponding author. E-mail: jwwang@suda.edu.cn. Tel: +86 512 65880025. Fax: +86 512 65880031. Zheng et al. 3005 was evaluated by DPPH/superoxide/hydroxyl radical scavenging, reducing power and metal chelating activity in the present study. The superoxide dismutase (SOD) activity in mycelia extracts was also investigated. Finally, the oxidative injury protective effect of the extracts was examined on PC12 cells (pheochromocytoma cell line) treated with peroxide hydrogen (H2O2). MATERIALS AND METHODS Cultivation and extraction of mycelia of Tolypocladium sp. The fungus used in this study was isolated from the fruiting body of a wild C. sinensis collected on the high plateaus (altitude over 4000–4500 m) in Sichuan, China. It was identified as one of the anamorph strains phylogenetically related to C. sinensis and belongs to Tolypocladium genus (Chen et al., 2006) and was deposited in our lab with a voucher number Ts-1. The Ts-1 mycelium was cultivated on liquid medium containing (per liter) 40 g glucose, 10 g yeast extract, 5 g peptone, 1 g KH2PO4 and 0.5 g MgSO4 in shakeflasks at 150 rpm and 28oC. After 7 days of shaking incubation, mycelium biomass was harvested from the liquid culture by filtration and dried at 50oC. The dry mycelium was pulverized and......

Words: 956 - Pages: 4

Premium Essay

Dna Extraction

...Extraction of DNA from an Onion Molecular biologists and biochemists are involved with research in finding out as much as possible about the DNA in plants and animals. Although DNA was discovered in the 1950’s, there still remains a lot to be known about it, especially how it is used to determine the physical traits that we all have, and how it regulates the workings of the body. We should always remember that DNA is just a chemical named deoxyribonucleic acid. Because it is a chemical, we can do reactions with it just like we can work with any other chemical. In this lab, we will use the chemical properties of DNA to extract it from the cells of onions. Experiment: Note: You should write all observations from this lab in the observation section on the third page of this lab. These observations will account for a large part of your grade, so be neat and complete! 1) Prepare a buffer solution by pouring the following into a clean 250 mL Erlenmeyer flask: - 120 mL of water (distilled water, if available) - 1.5 grams of sodium chloride (table salt) - 5.0 grams of baking soda (sodium hydrogen carbonate) - 5.0 mL of shampoo or liquid laundry detergent What buffer solutions are used for: This buffer solution is used in this lab for several reasons. First of all, the saltiness and acidity (pH) of the solution is very close to that in living things; as a result, the DNA will like to dissolve into this solution. ......

Words: 1503 - Pages: 7

Free Essay

Dna Extraction

...Date: 22/08/2013 Title: Extraction of genomic DNA Introduction: Isolation of genomic DNA is one of the most commonly used practices in several areas of science. Purified, high molecular weight DNA is used for many applications such as: * To prepare genomic DNA libraries * To isolate genes to be cloned * To carry out southern blotting and hybridization Many different methods are available for isolation of genomic DNA, and they all involve the following basic stages. * Disruption and lysis of starting material: * Cell walls and cell membranes are broken to release DNA and other cellular components. * Removal of proteins and other contaminants: * Protein contaminations are removed by digestion with proteinase K followed by salting out and denaturing some proteins by SDS. * Recovery of DNA: * DNA is precipitated using ethanol or isopropanol in the presence of monovalent cations All DNA isolation protocols have a common goal in isolating high molecular weight DNA, which meet the following three criteria: 1) Purity should be high enough for further downstream applications such as restriction digestion. 2) DNA should be intact to give accurate and reproducible migration patterns on gel electrophoresis. 3) Yield should be high enough to obtain a required quantity of DNA from a reasonable amount of tissue. Materials and......

Words: 961 - Pages: 4

Premium Essay

Construction

...It introduces what is meant by principled negotiation in dealing with construction conflicts. It describes the theoretical background on how to have a successful negotiation for both contracting parties, namely employer and contractor. During the negotiation process, several options for mutual gain or “win-win” situation will be looked into before applying objective criteria to reach the settlement. Finally, we will discuss few case studies that related to negotiation in construction industry. Learning Objectives By the end of Unit 1, you should be able to: Identify questions check list for negotiation prior implementation; Explain the application of principled negotiation into construction industry; Apply appropriate techniques of negotiation in reaching the settlement in construction industry; 1.1 Question check list for negotiation a typical project consists of six stages, which are: 1. Conceptual stage 2. Budgeting stage 3. Design stage 4. Tendering stage 5. Construction stage 6. Post-construction stage 1.1 Question check list for negotiation the adversarial relationship: • • • • Between employer and contractor Between architect and quantity surveyor Between quantity surveyor and contractor Among architect, employer and contractor 1.1 Question check list for negotiation Some guidelines are proposed as a reference to determine the situation that required negotiation in the construction industry, for instance: • There is still room for discussion on the......

Words: 1528 - Pages: 7

Premium Essay

Financial Projection

...Financial Projection Use fund Start-up Expenses | First month (RM) | First 6 month (RM) | Salary- CEO | 1,800 | 10,800 | Salary- 5 Staff | 7,500 | 45,000 | Advertising- Newspaper | 450 | 2,700 | Advertising- Magazine | 800 | 4,800 | Brochure fees | 120 | 720 | Promotion- Coupon | 6,500 | 8,500 | Promotion- Discount | 5,000 | 7,500 | Web site registration and maintenance fee | 300 | 1,800 | EPF | 1,116 | 6,696 | SOCSO | 163 | 978 | Rental | 45,000 | 120,000 | Insurance (Company) | 250 | 1,500 | Legal fees | 200 | 200 | Registration for Business License | 150 | 150 | Business License | 200 | 200 | Telephone and internet bill | 155 | 930 | Electricity and water bill | 450 | 2,700 | Petrol expense | 320 | 1,920 | Insurance and road tax | 1,050 | 1,050 | Office Stationary | 80 | 80 | Total investment | 71,604 | 218,224 | Sources of Funds 1. CEO’s contribution – RM 50,000 2. Others staff contribution– RM 200,000 3. Subsidies from Government – RM 80,000 Total capital = RM 50,000 + RM 200,000 + RM 80,000 = RM 330,000 The first six month of total expense for UVP is RM 218,224. The detailed information of expenses is listed as follows. Based on this, the capital is set as RM 330, 000. These extra funds are needed for running cash flow and backup of cash. Assumptions Sheet Note 1: Sales in year 2011 is a combination of sales that includes Worker Uniform with Hat, Long Sleeve and Long Pant. The calculation of sales is as......

Words: 725 - Pages: 3

Premium Essay

Construction

...Current Material Selection Overview A survey which conducted to investigate the criteria of the selection of construction material from the perspectives of architect, builder, engineer, product manufactures,etc. The participants of the survey included the following categories of professionals: Architects: 48%; General Contractors and Builders: 4%; Engineers: 12% including engineering consultancy firms; and Others-36% including Materials Specifiers and Quantity Surveyors, Product Manufacturing consultancy, Green building Proponents, Program Designers, Green Building/net-zero Consultants and researchers . The distribution of the survey tool across the USA, UK, and China was based on their geographic variations. The result of the analysis showed that the majority of users rarely consider the relevant factors when selecting building materials or products. Over half of respondents showed that they selected material only based on the previous experiences or individual preferences. Besides, the survey assessed the views of targeted experts of various disciplines and geographical settings, to the likelihood of the impacts of other potential factors involved in making strategic decisions during material-selection. 96% identified “Environmental and Health factors or Buildings variables” as the most desirable content information for enabling effective and sustainable decisions in selecting appropriate materials. There was a tie between two categories of factors as 84% of the sample......

Words: 352 - Pages: 2

Premium Essay

Economic Projection

...Economic Projection Macroeconomics In this report I give the statics that I found for each of the economic indicators for 2012 and 2013 along with what I found of the current state of 2014 then I make my best guess with the information I have as to how 2015 will look. I feel from what I have experienced as well as from my research, watching the news and just listening to people talk, 2015 will improve slightly from our current state as well as from comparing it to 2012 and 2013. The real GDP growth for 2012 was 1.6% and 3.13% in 2013. So far in 2014 it is at 2.43%. Given these numbers we show that production had a significant rise in 2013 and then has slowed down in 2014 slightly, but is still holding steady. I say that as the economy continues to do better so will production. I am predicting that 2015 will be about the same as 2013 at 3.13%. Unemployment has been steadily going down from each year. It has lowered from 8.1% in 2012 to 7.4% in 2013 to its current 6.4%. I think that in 2015 the unemployment will go down to about 5.4%. I believe the drop of unemployment is mainly due to people giving up on the job search. Some have either not been willing to relocate or have went back to school and some just have given up completely or have switched over to disability income. The CPI has increased slightly from 0.1% in 2012 and 2013 and at this time it is 0.3%. I think inflation will go up in 2015 to 0.6%. As unemployment drops inflation usually rises. I am......

Words: 912 - Pages: 4

Premium Essay

Dna Extraction

...LAB#11 DNA EXTRACTION & KARYOTYPING ________________________________________________ Objectives: After completing this exercise, you should be able to: 1. Develop an understanding of the structure and properties of DNA, based on observation and manipulations 2. Understand some implications of DNA technology 3. Extract DNA from an onion to understand that all cells contain DNA Introduction/Purpose: DNA is too small to see under a regular microscope, so then how can it be studied? DNA is a large chemical molecule found in all living things, so it should be possible to extract it from cells or tissue. All we need to do is disrupt the cell’s plasma membrane and nuclear envelope, make the DNA clump together. DNA extraction is possible. Plant material is easy to use and DNA extractions from onion, bananas, liver, or wheat germ are common classroom activities or demonstrations. Plants used in agriculture and horticulture are often artificially selected for their large flowers and fruits. Strawberries are no exception. A reason for the size of today’s large supermarket strawberries is the octaploid nature of their cells. With eight sets of chromosomes, they have plenty of DNA for classroom extraction. The fruit is homogenized with a detergent to prepare a filtrate. The detergent emulsifies and forms complexes with the lipids and proteins of the plasma membrane this causes them to precipitate out of the solution. The mixture is then filtered through......

Words: 1173 - Pages: 5

Premium Essay

Construction

..."we see that construction has two choices: ignore all this in the belief that construction is so unique that there are no lessons to be learned; or seek improvement through re-engineering construction, learning as much as possible from those who have done it elsewhere" egan report. Task force visit to the site. (Rethinking construction) The problems wityh the industry: (Rethinking construction) Nevertheless, the industry recognises that it needs to modernise in order to tackle the severe problems facing it, not least that: 4. it has a low and unreliable rate of profitability. Margins are characteristically very low. The view of the Task Force is that these are too low for the industry to sustain healthy development and we wish to see those companies who serve their clients well making much better returns; l it invests little in research and development and in capital. In-house R & D has fallen by 80% since 1981 and capital investment is a third of what it was twenty years ago. This lack of investment is damaging the industry's ability to keep abreast of innovation in processes and technology; l there is a crisis in training. The proportion of trainees in the workforce appears to have declined by half since the 1970s and there is increasing concern about skill shortages in the industry. Too few people are being trained to replace the ageing skilled workforce, and too few are acquiring the technical and managerial skills required to get full value......

Words: 373 - Pages: 2

Premium Essay

Construction

...Written Assignment 1 Unit Four: Written Assignment Joseph Shaw San Joaquin Valley Online Construction/110 D1 Michael McGuire 05-27-10 Written Assignment 2 Chapter 15 Review Questions 1. How does the type of contract influence the format of the payment request? The contract self dictates payment terms for instance; payment on a lump sum contract allows for payment based upon quantities installed. 4. What is retention? What is it used for? Retention is when you hold back a portion of the monthly pay request with respect to the subcontractor. It is used as a cash tool; this helps bring the subcontractors focus on completing the project. 7. What is interim lien releases used for? Interim lien releases should be collected and filed just in case a problem occurs. Chapter 17 Review Questions 3. Why is project-specific quality control plans needed? Why are generic quality control plan’s unacceptable? Quality control plans and project specific quality control plans are needed to identify quality control systems for each major work package. Generic quality control plans are not accepted because they do not discuss enough detail of the work or specific materials. 4. What are mockups and why are they needed? Mockups are used to establish workmanship standards and they are sometimes used for testing such as climate testing. Written Assignment 3 Chapter 19 Review Questions 4. What is the difference between owners initiated change order......

Words: 540 - Pages: 3